600W 12V/24V/48V Horizontal Axis Wind Turbine

Basic Specification:

Model: ATO-WT-600M4
Matched Controller Model: ATO-WTCMPPT-600
Rated Power: 600W
Maximum Power: 630W
Rated Voltage: 12V/24V/48V
Start Up Wind Speed: 2.5 m/s
Rated Wind Speed: 11 m/s
Survival Wind Speed: 45 m/s
Wheel Diameter: 1.85m

1. Rotor. Permanent magnet is fixed on the rotor shaft and its magnetic pole pairs are symmetrical and round. Generally, the strength of magnetic field, rotor speed and the number of magnetic pole pairs affect the voltage.
2. The stator, the wire winding on the stator core, single direction if use similar market motor winding method is different, now is the most simple, for example, the diameter of the wire will affect the power current, namely the power of the generator voltage winding length and number of turns, the other set of rotor material can require the use of magnetic materials, the most common is iron, but the easiest way to get best use iron overlay, stator spacing influence permeability performance, namely generator voltage and power will have influence, should not be more than 0.5 mm, this basic form a generator.
3. By using power to rotate the rotor (the speed of rotation depends on the voltage), ac voltage can be obtained at both ends of the wire.