Home » Horizontal Axis Wind Turbine » 400W 12V/24V/48V Horizontal Axis Wind Turbine

400W 12V/24V/48V Horizontal Axis Wind Turbine

We offer a horizontal axis wind turbine for home use, rated at 400 watts, with voltage options of 12V/24V/48V. This quiet, corrosion-resistant turbine is designed for easy installation and maintenance, and is suitable for a wide range of applications, from small wind farms to commercial and industrial projects.

400W horizontal wind turbineBasic Specification:

Model: ATO-WT-400M2
Matched Controller Model: ATO-WTC-400
Rated Power: 400W
Maximum Power: 420W
Rated Voltage: 12V/24V/48V
Start Up Wind Speed: 2.5 m/s
Rated Wind Speed: 11 m/s
Survival Wind Speed: 45 m/s
Wheel Diameter: 1.75m

Click to buy a 400W horizontal axis wind turbine for your home!

400W Wind Turbine Power Curve
400W wind turbine power curve

Tips: How to choose a small wind turbineļ¼Ÿ
In general, wind turbines with a capacity of less than 10 kW are classified as small wind turbines. Compared to medium and large wind turbines, small wind turbines are compact, flexible, and easy to install. They are also relatively inexpensive, require less wind speed to start, and offer high performance for the cost. Additionally, they can be used in conjunction with photovoltaic and other power generation devices.
Here are some tips for purchasing a small wind turbine:
  • It is advisable to use high-strength nylon composite material, which is high-strength, has good toughness, is anti-UV, anti-corrosion, anti-wind and has good aerodynamic performance, as well as unique strong wind stall protection characteristics.
  • Magnetic steel is best used with rare earth NdFeB permanent magnets, which are highly efficient and lightweight, consume less energy and have a large output power.
  • It is advisable to have a pre-deflection design of the stern rudder, so that it can automatically and accurately align with the windward direction, improve the output power and allow for adjustment and strong wind protection simultaneously.
  • Carbon brush and brush ring structure. With such a device, the electricity from the wind turbine can be transferred from the carbon brush to the brush ring, and the brush ring can lead the electricity out. When the wind turbine rotates, it will rotate to prevent the cable from being broken.
  • The sleeve connection is the optimal choice for high security and reliability, eliminating the risk of flying cars. It is also a convenient solution for installation professionals. In the field, installation is not only a technical task, but also requires physical work. Easy installation for site installers is a valuable asset.
To learn more about the different types of wind turbines, please visit windustry.com, where we provide you with the most comprehensive and diverse wind energy advice.

Post a Comment:

    
Plz Calculate (7 + 7) =
(Your comment will show after approved.)

You may also like:

Wind

Featured Articles
Overvoltage Protection for Wind ... Overvoltage Protection for Wind TurbinesDue to their principle of operation,  wind turbines have to be set up outdoors and  are used in a wide range of ...
Wind Farm Siting, Installation and ... Wind Farm Siting, Installation and OperationBefore wind turbines can be installed, the most appropriate location or locations for them needs to be determined.  The ...
Is Wind Energy Practical for Me? Is Wind Energy Practical for Me?Can I use wind energy to power my home?  More people across the country are asking this question as they look for a hedge ...
How do Wind Turbines Work? How do Wind Turbines Work? Wind turbines generate electrical power in the same way as all other generation technologies. The only difference is in the ...
What is the Wind Energy Conversion ... What is the Wind Energy Conversion System?Due to technical and economic visibility,  wind power has emerged as one of the most promising renewable energy sources ...